Cavo Huatong Xlpe Isolato Sta/Swa Armor /Cavo Di Alimentazione Con Guaina In Pvc

Informazioni di Base

Model No..

power cable

Tipo

Isolato

Tipo di conduttore

Stranded

Applicazione

Sotterraneo

Materiale del conduttore

Rame

Materiale della guaina

PVC

Materiale di isolamento

XLPE

Forma Materiale

Filo tondo

Campo di applicazione

Ritardante di fiamma

Certificazione

ISO9001 ,
CE ,
CCC ,
RoHS

Informazioni Aggiuntive.

Marchio

Huatong

Imballaggio

All Wooden, Coils or as Per Your Request Package

Origine

China

Codice SA

8544492100

Capacità di Produzione

5000tons /Month

Descrizione del prodotto

copper conductor 1kv up to 35 kv xlpe insulated power cable ,electric wire
Insulation Material: XLPE Type: Medium Voltage Application: Power Station
Conductor Material: Copper Jacket: PE
Packaging & Delivery
Packaging Detail: Steel-drum
Delivery Detail 20-30 days

Specifications
1. We use the Very high-purity copper which from yunnan. The purity is 99.95%.
2. We use the XPLE which come from Dow company

26/35KV 3*150 XLPE insulated steel-tape armoured and PVC sheathed powe cable

Remark: 1. Including products for flame-resistant, fire-resistant and anti-termite.

2. Mark"Z-"before original type for flame-resistant product.

3. Mark"N-"before original type for fire-resistant product.

Conductors usually are round, fire-resistant material is on surface of the round conduct.

4. Mark"-FY"after original type for anti-termite

We still can manufacture power cable as follows:

1. XLPE insulated PVC sheathed power cable

2. XLPE insulated PE sheathea power cable

3. XLPE insulated steel tape armoured and PVC sheathed power cable

4. XLPE insulated thin steel-wire armoured and PVC sheathed power cable

5. XLPE insulated thin steel-wire armoured and PVC sheathed power cable

6. XLPE insulated thin steel-wire armoured and PE sheathed power cable

7. XLPE insulated thick steel-wire armoured and PVC sheather power cable

8. XLPE insulated thick steel-wire armoured and PVC sheathed power cable

9. XLPE insulated low smoke and free-halogen steel-tape armored ployolefin sheathed flame ratardant power cable

The core Number we can manufacture is 1-61, 3+1, 4+1, 3+2

The nominal cross section we can manufacture is from 1.5mm2 to 1000 mm2

Executive Standard:
It is manufacture under GB/T12706-2002 standard(The same as IEC60502).

Installation
This cable can be installed in duct, tray or direct burial. It is recommended that the installation instructions indicated
by the Local Electric Code, or any equivalent, be followed,so that the safeguarding of persons and the integrity
of the product will not be affected by eciencies in the installation.

This series includes:

Copper (aluminum) core, XLPE insulated and sheathed power cables.
Copper (aluminum) core, XLPE insulated, PE sheathed power cables.
Copper (aluminum) core, XLPE insulated, steel tape armoring PVC sheathed power cables.
Copper (aluminum) core, XLPE insulated, steel tape armoring, PE sheathed power cables.
Copper (aluminum) core, XLPE insulated, steel wire armoring, PVC sheathed power Cables.
Copper (aluminum) core, XLPE insulated, steel wire armoring, PE sheathed power cables
Rated voltage: 0.6/1kV, 3.6/6kV.
Number of cores: 1 to 6.
Relative manufacturing standards: IEC60505, BS, DIN.

Packing: Wooden drum, steel wooden drum.

Power Cable
-Conductor:
Solid or stranded copper
-Insulation:
Cross-linked polyethylene( XLPE or PVC)
-Circuit Identication:
The insulation shall be red, black
-Filler:
Polypropylene lament with lapped binding tape
-Inner Sheath:
Polyvinyl chloride (Black)
-Armor:
Galvanized steel wire
-Core-covering:
Binding tape
-Outer Sheath:
Polyvinyl chloride (Black)
-Application:
For use in ducts, trays and direct burial in ground. The cable is subject to immerse in water all the time.
-Standards / Testing Specications:
IEC 60502-1.

Type		Description	Application n
Cu	Al	Description	Application n
YJV	YJLV	XLPE insulation PVC sheath power cable	To be laid indoors, in tunnel or pipe, the cable couldn’t bear mechanical force outside
YJY	YJLY	XLPE insulation PE sheath power cable
YJV22	YJLV22	XLPE insulation, steel tape armor, PVC sheath power cable	To be laid underground, the cable could bear certain mechanical force, but it couldn’t bear great pulling force.
YJV23	YJLV23	XLPE insulation, steel tape armor, PE sheath power cable
YJV62	YJLV62	XLPE insulation, have no the magnetism steel tape armor, PE sheath power cable
YJV32	YJLV32	XLPE insulation, thin steel-wire armor, PVC sheath power cable	Be applicable to the water inside well and fall in the bad soil, the cable cans bear the equal dint outside the machine with pull the dint .
YJV72	YJLV72	XLPE insulation, have no the magnetism thick steel-wire armor, PVC sheath power cable
YJV42	YJLV42	XLPE insulation, thick steel-wire armor, PVC sheath power cable	Be applicable to the underwater with the bottom of sea, the cable cans bear the bigger pressure with lead to pull the dint.
Special Note	The single-core magnetism material packs the cable is not suitable for to use for the AC power supply back track, the necessity hour eligibility uses the single-core 62 or 72 type pack the cable. Disallow the cent to cross the magnetism piping mutually when single-core cable establish, the in order to prevent results in the descent that cable transport electric current ability.

Related Product:

Packing:
1.We guarantee to ship goods out 5-10 working days after payment confirmation.
2.If you didn’t receive the item after 30 days,please feel free to contact us.We will make all our to resolve the problem.
Warranty:
  1.For wrong shipped items, Please contact us, We will arrange to deliver the correct items.
2.For defective or faulty products,please contact us first,We will resolved your issues,thanks !
     FAQ
Q:How to order
1. Please tell us what kind of model you need.
2. We make Proforma Invoice to you.
3. Please check and confirm the Proforma Invoice.
4.Once we confirmed the order,please pay it soon.
5. After payment , all goods will be sent  within 10 working days as usual.
Q. The MOQ
I am glad to accept a small order to test the market,While kindly remind, the more the quantity, the better the price.
Q:What is the quality of the goods
Please trust us without any doubt ,all products we produce with CE,PCCC,SABS,certified .
Q. If rigid conductor cable was not I want, what should I do?
If you find this rigid conductor cable is not exactly meet what you need. Please send us emails about your inquiry details. We will give you solution within 2 hours!

Advantage:
We have a very strict quality controling system which promise that cable we produce are always of best quality!Of course , if you have some good ideas that you want us to develop or reproduced, please feel free to send us your product image or design artwork, we are also pleased to become your Original Equipment Manufacture.We not only promise the good quality but also stable quality . Customer no need usually change suppliers again!We are sincerely looking for your cooperation!
When you send us the inquiry ,you can send the specification :
1.Voltage grade
2.Conductor /insulation /screen /armour /jacket /jacket material
3.Tell the quantities of cores and cores section of conductor
4.Application
5.Order quantities
6.FOB or CIF price